Sentiotec Wave.com4 infra, Инструкция по установке и эксплуатации

Страница: 47 / 56

EN
Instructions for use for the user p. 21/26
Mode button:
Use MODE to switch between the menu items:
Heating, Heating Time, Light and Fan.
Temperature: Use the +/- buttons to set the required
program number.
Heating duration: Use the +/- buttons to set the heating time (5-minute
increments from 5 to 60 minutes). Press the On/Off
button to start the timer. An A appears in the display
and the time counts down. Pressing the On/Off button
again in the Heating Time menu will stop the timer.
The controller operates until it is switched off
(max. 6 hours).
Light:
Use the +/- buttons to turn the lighting up and down.
Fan: Use the +/- buttons to set the fan power.
Pressing the On/Off button starts the fan,
pressing the On/Off button again in the Fan
menu stops the fan.
Description of the programs:
Program 1 is intended for relaxation and is characterised by a continuous heat
profile. Programs 2, 3 and 4 are designed for sports activities. Program 2 is
suitable for warming up before sport, while programs 3 and 4 are designed
for relaxation after sport.
Program number Description Intensity Program duration
PR 1 Relaxation Low 40 min.
PR 2 Warming up Medium 25 min.
PR 3 Endurance (short) Medium 30 min.
PR 4 Endurance (long) High 35 min.
MODE
1 2
7.5. Program mode
Program mode for operation with infrared radiator.