Sentiotec Wave.com4 infra, Инструкция по установке и эксплуатации

Страница: 42 / 56

Instructions for installation and use p. 16/26
Fig. 8: Master/slave configuration
X6
A B Slave
- - 1
- x 2
x - 3
x x 4
x = jumper inserted
Activating the optional foil sensors for the slave power units
If several power units are connected to each other, it is possible to use additional
foil sensors.
For each connected power unit an additional foil sensor can be connected.
The prerequisite is operation in the foil system (see
5.2
).
To activate the foil sensor, plug the jumper JP2 on the SLAVE
power unit into the box head socket board “OPT3” (see Fig. 9 )
OPT3
JP3 JP2 JP1
?
Fig. 9:Activating the optional foil sensors