Sentiotec Wave.com4 infra, Инструкция по установке и эксплуатации

Страница: 45 / 56

EN
Instructions for use for the user p. 19/26
Mode button: Use MODE to switch between the menu items:
Heating Circuit 1&2, Heating Circuit 1,
Heating Circuit 2, Heating Time, Light and Fan.
Heating Circuit
1 & 2:
Use the +/- buttons to set the intensity
for both circuits
Heating Circuit 1 Use the +/- buttons to set the intensity
for heating circuit 1
Heating Circuit 2 Use the +/- buttons to set the intensity
for heating circuit 2
Heating Time: Use the +/- buttons to set the heating time (5-minute
increments from 5 to 60 minutes). Press the On/Off
button to start the timer. An A appears in the display
and the time counts down. Pressing the On/Off but-
ton again in the Heating Time menu will stop the
timer. The controller operates until it is switched off
(max. 6 hours)
Light:
Use the +/- buttons to turn the lighting up and down.
Fan:
Use the +/- buttons to set the fan power. Pressing
the On/Off button starts the fan, pressing the On/Off
button again in the Fan menu stops the fan.
MODE
1
1
2
2
● In program mode, four stored programs can be set.
● The heating time can be set from 0 - 60 minutes.
● The light intensity can be set from 0 - 100% in 10% steps.
● The fan power can be set from 0 - 100% in 10% steps.
7.3. Intensity mode
Intensity regulation for infrared radiator operation