EN
Instructions for installation and use
p. 9/26
4. Installation
During installation, observe the technical data on Page 26:
4.1. Installing the power unit
The power unit
1
is mounted on the cabin ceiling (
Fig. 1
and
2
), on the cabin
wall or as recommended by the manufacturer. The power unit may only be used
with one of the mains cables listed in the accessories.
1.
Screw the wave.com4 Infra housing to the cabin ceiling or wall with the four
wood screws provided (16 mm long).
2.
Connect the 4-pin RJ10 data cable to the 4-pin control unit socket on the side
of the housing (see
Fig. 5 on page 13
).
3.
Connect all components to the wave.com4 Infra power unit as described in
“5.1. Connecting the components” on page 13
.
Fig. 1: Installing the power unit
CAUTION! - DAMAGE TO THE UNIT:
To cool the power unit, air must circulate freely around the aluminium cooling
plate. The power unit may not be covered by any objects or materials.
Содержание Wave.com4 infra
Страница 53: ...NOTIZEN APPUNTI NOTES NOTE NOTITIES...
Страница 54: ...NOTIZEN APPUNTI NOTES NOTE NOTITIES...
Страница 55: ...NOTIZEN APPUNTI NOTES NOTE NOTITIES...
