Rev B
Doc. 6001141
Page 5 of 33
PART 2
TIME ZONES AND HOLIDAYS
A. PROGRAMMING TIME ZONES (STEP 25)
The Times Zones feature allows you to set up time periods and days during which access is restricted
for entry codes. For example, the gardener’s entry code will only grant access on Mondays between
the hours of 9:00 AM and 3:00 PM.
You can program up to seven two zones, with two segments each.
Format
25 + time zone segment starting time + ending time + days of the week + “#”.
•
Time zone numbers range from 1 to 7 with two segments for each time zone (numbered
1 or 2).
•
Starting and ending times are four digits long in 24-hour format.
•
The days of the week are numbered as follows:
1 = Sunday
2 = Monday
3 = Tuesday
4 = Wednesday
5 = Thursday
6 = Friday
7 = Saturday
8 = Holidays
Example
25 + 2 + 1 + 0800 + 1700 + #
(sets time zone 2, segment 1 to start at 800 AM and end at 5:00 PM Monday through Friday
and holidays).
Note
•
To set up a time zone that extends past midnight and into the next day, create one
segment that runs until midnight (for example, Monday through Friday from 8 PM to 12
AM) and a second segment that starts at midnight on the following days (for example,
12AM to 4AM on Tuesday through Saturday).
•
If you want a time zone to be valid on holidays, you must also program that time zone to
be valid for a day of the week.
B. SETTING HOLIDAYS (STEP 28)
Holidays are special calendar dates which can be used to modify the action of:
•
Do Not Disturb Schedules
•
Gate Unlock Schedules
•
Entry Codes with Time Zones
•
Call Forwarding Schedules
For example, if New Year’s Day is set up as a holiday, then entry codes that would ordinarily be
allowed access will not be granted entry on January 1st. You can program up to 10 holidays.
Format
28 + holiday month + date + “#”
•
The holiday number is one digit (0 through 9).
•
The month and date are each entered as two digits.
Example
28 + 1 + 0101 + #
(sets January 1st as holiday number 1).
Содержание CROWN JEWEL
Страница 2: ......
Страница 6: ...Doc 6001141 Rev B ...
