SentexSystems CROWN JEWEL, Руководство по программированию расширенных функций

Страница: 13 / 39

Rev B Doc. 6001141 Page 7 of 33
PART 4
VISITOR CALL FEATURES
A. SETTING THE VISITOR CALL DOUBLE RING (STEP 06)
Factory Setting: 2 (double ring).
Format 06 + ring type + “#”
•
Ring types:
1 = single ring
2 = double ring
Example 06 + 2 + #
(double ring)
B. SETTING THE MAXIMUM VISITOR CALL RING COUNT (STEP 07)
You can program the number of rings the unit will allow before it discontinues the call placed to the
residence.
Factory Settings: 12.
Format 07 + number of rings + “#”
•
Number of rings can be set from 1 to 24; this entry is 1 or 2 digits long.
Example 07 + 6 + #
(sets the unit to discontinue the visitor call after 6 rings to the house).
C. SETTING TALK TIME (STEP 08)
Sets the maximum length of a call that can be made by a visitor.
Factory Settings: 90 seconds.
Format 08 + number of s “#”.
•
This length can be set from 15 to 250 seconds; the entry will be two or three digits long.
Example 08 + 120 + #
(sets the talk time to 2 minutes).
NOTES 1. When the Crown Jewel is calling the residence during a normal visitor call, the talk time
starts when the call is answered.
2. When the Crown Jewel is calling a Call Forwarding number, the talk time starts
immediately after the number is dialed.
3. When there are 10 seconds of talk time left, the unit will beep 1 once each second to
notify you. If you wish to extend the talk time, press “1” (one key) now.