Senter AV6418 OTDR Скачать руководство пользователя страница 63

Страница: 63 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

event point and give event list automatically after stopping

test.

If this item is not selected, in real-time, average and dead

zone test mode, the instrument will not analyze trace after

stopping test, only after the button

【

Analyse

】

is pressed in

the first menu, the instrument will analyze trace, mark event

point and give event list.

Locking Maker A & B:

Selecting this item will lock the distance between marker A

and B, so moving one of them will move both and

meanwhile they will keep the distance unchanged.

If this item is not selected, when moving one cursor, the

other cursor will not move.

If this item is only valid during average loss test and

reflection loss test, during testing splice loss, four cursors

will appear and this item become invalid. In the edit state

(adding or adjusting event point) of event table, cursor will

be unlocked automatically.

On-line Test:

This item is only valid in the module with filter. When it is

selected, the instrument will connect the filter in optical

assembly, and the time, the optical fiber link with active

optical signal can be measured in wavelength of 1,625nm or

1,650nm.

Low Battery Alarming:

In use of battery, when this item is selected, it will give alarm

message to remind users of too low battery capacity if the

batter capacity is less than 5%.

Página No.71 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Содержание AV6418 OTDR











































































































































































Результаты поиска

Содержание AV6418 OTDR

Отзывы:

Senter AV6418 OTDR, Руководство пользователя, Страница: 63 / 170

Результаты поиска

Содержание AV6418 OTDR

Отзывы: