Senter AV6418 OTDR Скачать руководство пользователя страница 60

Страница: 60 / 170

SIE-CNTEP-1100002104-2014
LCFS

AV6418 OTDR

Note!

Range (km): Used to set the range of scanning trace.

AV6418 OTDR ranges include: 400m, 800m, 1.6km, 3.2km,

8km, 16km, 32km, 64km, 128km, 256km and 512km (Max.

Optical range is related to the module selected).

Pulse (ns): Used to set the width of laser pulse. Longer

pulse width can test longer fiber and provides better SNR,

smoother trace and lower resolution; shorter pulse width

provides higher resolution, but it tests shorter distance and

results in worse SNR.

The pulse width setting is related to the range selected.

Att. (dB): Used to set attenuation of signal. Attenuation

can be set to 0dB, 5dB, 10dB, 15dB and 20dB. If value of Att.

is minimum (such as 0dB), the fiber length to be tested is

maximal, but the near end of fiber may be saturation (A

straight line is displayed in screen); If the value of Att. is

maximal (such as 20 dB), the fiber length to be tested is

minimum and trace SNR is worse but dead zone will be

smaller.

(1) If the length of the optical fiber under test is very long, in

manual mode, larger value of Att. can be used to test

proximal optical fiber and smaller value of Att. can be used

to test distal optical fiber section by stages.

Página No.68 LCFS

CONVALIDACIÓN DE ERRORES DEL PROCESO:

“ADQUISICIÓN DE OTDR (OPTICAL TIME DOMAIN REFLECTOMETER) – REDES GPON/
FTTH/ SDH"

Содержание AV6418 OTDR











































































































































































Результаты поиска

Содержание AV6418 OTDR

Отзывы:

Senter AV6418 OTDR, Руководство пользователя, Страница: 60 / 170

Результаты поиска

Содержание AV6418 OTDR

Отзывы: