3.
Specifications
SI-100IM (Main Alarm Unit)
1
Main CPU
MKE02Z64 (32bit High Speed CPU)
2 Input Power
DC24V
3 Output Power
DC24V
4 Input Power Display
4Digit FND Digital Display
5 Main Power Display
Green LED Display, 18 Bar Graph
6 Spare Power Display
4Digit FND Digital Display, 18 Bar Graph
7 Spare Power Monitoring
Red LED Display
8 Warning Alarm Display
AU01
~
AU12
Display consecutive changes of warning unit.)
9 Spare Power Test
Battery Test Switch
10
Alarm Output
Alarm 1 SPDT Relay Dry contact Signal Output
Alarm 2 SPDT Relay Dry contact Signal Output
Alarm 3 SPDT Relay Dry contact Signal Output
Selected output among DC12V Output Alarm1 to 3
11 Operation Power
DC12V~DC28V (DC12V or less CPU Sleep Mode No Display)
12 Size
40(W) x 130(H) x104(D)
13 Spare Power
Ni-Cd Battery 18V 600mA (4Channel)
**While the 24V.DC power is introduced for battery charge and discharge and for the power
of the Alarm Unit, this unit can make an alarm generating unit display by communicating
with the Alarm Unit and generate an alarm.
SI-100IM Configuration and Description
1.
4Digit FND Digital Display(Input Voltage: AC/DC)
2.
Green LED Display, 18 Input Voltage Bar Graph
3.
Back-up Power Monitoring Lamp (Turned off when
battery is disconnected.)
4.
Switch Caution Lamp (When warning is activated,
display buzzer stop)
5.
Voltage Display
6.
Power Lamp (POWER ICON)
7.
Third warning Lamp based on SI-100IA configuration
8.
Second warning Lamp based on SI-100IA configuration
9.
First warning Lamp based on SI-100IA configuration.
10.
Failure Lamp - Cable disconnection, Sensor defect
11.
Back-up power test Switch (Check Battery connection)
12.
Buzzer Stop Switch
13.
Return Switch (When buzzer stops, return to initial
mode)
Power
3rd
2nd
1st
Failure
Back-up
Power
Switch
Caution
Recovery
Buzzer Stop
Back-up Power
Test
