This manual consists of contents about how to use the gas detector. All operators
involved in the operation and maintenance of the equipment should read carefully before
operation. Caution or warning signs contained in the manual will always be followed. The
defects or failure of the product may be caused if our products are used outside the
scope of the environment and the product
’
s SPEC as specified in the manual or if the
equipment is used by workers not qualified for the maintenance and repair of the
products. SENKO is not responsible for such products
’
failure. Because our product
includes a default installation circuit diagram, an installation must be carried out by a
qualified person. Also, regular calibration and alarm check on the device must be
performed by a qualified worker. SENKO recommend you that monthly calibration and
check be performed for the accuracy and reliability of the device. Should a problem occur,
please contact the SENKO.
WARRANTY
SENKO warrants the SI series product for 24 months from the shipment date. SENKO
will repair or replace a defected product under the warranty free of charge with a new
product. However, components, such as sensors, lamps, and batteries, which will have
their lives shortened as used are not applicable to this warranty. If a product was
purchased a route that SENKO does not recognize, a product with malfunction cannot be
repaired or replaced free of charge when mechanical damages or deformations happen
from improper use of the product by a consumer or when product failures occur because
calibration or replacement of parts has not been made according to a procedure of
manual.
Should our product have defect or other quality problems, all the costs incurred except
the shipping cost will be borne by SENKO during the warranty period. After the warranty
period, all the costs of repair, replacement, transportation of products or parts, in
principle, will be borne by customers. SENKO is not liable for any indirect or incidental
loss or accidents that may occur while using the product. The warranty is limited to
replacement of parts and products. This warranty is applicable only to users who have
purchased the product from authorized sales offices or representatives specified by
SENKO. Warranty repairs must be made through a SENKO-designated A/S center with
experienced technicians.
Senko Co., Ltd.
73, Oesammi-ro 15beon-gil, Osan-si, Gyeonggi-do, Korea
TEL. 031-492-0445 FAX.031-492-0446
WARNING
Read this manual carefully before using the instrument. The instrument
will perform as designed only if it is used and maintained in accordance
with the manufacturer's instruction. Otherwise, it could fail to perform as
designed and persons who rely on this instrument for their safety could
sustain serious personal injury or death.
