Press the Setting Switch
when “
HOLD”
is displayed, and a default value
will be displayed Press the UP and DOWN Switch while a figure is being
displayed. You can change its value.
*. This is the mode to determine whether to memorize alarm or to make an automatic return
at the time of returning to the normal range after gas alarm has been emitted
*. By default, even after the primary, secondary, tertiary alarm all is returned to the normal
range, the alarm and the output will be still stored.
*. Even If the device is interlocked with other equipment and thus alarm is repeatedly on and
off depending on a concentration, a value can changed.
(Primary, secondary, and tertiary alarm can be changed alternatively.)
Output Calibration of 4mA
Output Calibration of 20mA
Output Calibration of Low Concentration Sensor
Output Calibration of High Concentration Sensor
The above four items are requirements during manufacture SENKO. If you make change or
modifications, they can affect the performance and functionality of the product. Any
modifications and changes are prohibited
