SENKO pellet WATER+AIR stoves
–
Instruction manual
42
esc
█ █ █ █ █ Ok
-
Fire
+
For all the displays described below, screen backlight will be maximally
maintained; unless a key is pressed within 10 seconds, the display returns
to START screen (
Figure 24
), and screen backlight is reduced (after 30
seconds); after additional 20 seconds, the backlight is deactivated.
Once the screen backlight is
deactivated, it can be reactivated by
pressing any key, after which a
display with a selection
Menu
will
appear (
figure 25
).
As shown in the previous figure, descriptions of functions appear on the
screen:
1. Operating mode selection key (
Mode
)
– changes the operating
mode from manual to automatic (MANU / AUTO) ;
2. Temperature change (5-35°C) / heating power (1-5) key (
Temp
/ Fire
) depending on the previously selected operating mode;
Press and hold the key for 2 seconds!
3. Pressing the menu key (
Menu
) enables the choice of additional
functions (see
chapter 5.8.
);
4. Warm air fan speed adjustment key (
Fan
)
– 5 speed levels;
5. Turning on / turning off key (
ON/OFF
) returns the display to
START screen.
Mode:AUTO Menu
Temp:23°C Fan:A
Figure 25
1
3
2
4
5
Mode:AUTO Menu
Temp:23°C Fan:A
esc 23°C Ok
-
Temperature
+
Mode:MANU Menu
Fire:5 Fan:5
2 sec
Figure 26
2 sec
Содержание P 12 SLIM WATER+AIR
Страница 14: ...SENKO pellet WATER AIR stoves Instruction manual 13 Figure 1 P 12 WATER AIR P 12 WATER AIR BOX...
Страница 15: ...SENKO pellet WATER AIR stoves Instruction manual 14 P 12 SLIM WATER AIR P 20 WATER AIR Figure 1...
Страница 17: ...SENKO pellet WATER AIR stoves Instruction manual 16 4 INSTALLATION 4 1 RECOMMENDATIONS Figure 3...