SENKO pellet WATER+AIR stoves
–
Instruction manual
17
PELLET
STOVE
We advise you
to check
the following elements
prior to installation:
Appropriate minimum volume of space where the stove will be
installed (avoid placing the stove into hollow or narrow spaces
under 40 m
3
of volume);
Ensure suitable and proper exchange of primary air necessary for
combustion via connection with external air;
Proper execution of chimney and smoke venting pipes.
Prior to installation
it is necessary to
control
proper
positioning
of the
stove and the chimney, which must comply with :
Prohibitions concerning the installation;
Safety distances;
Limitation prescribed by the local administrative regulations or special
safety measures prescribed by the authority;
It is not allowed to install the stove in rooms where another heating
device without the autonomous air exchange already exists
;
It is forbidden to install the stove in the room with explosive
atmosphere
.
A
200 mm
from the back wall
B
200 mm
from the side wall
C
800 mm
from the front grid
D
500 mm
floor protection
E
300 mm
(measured from
the maximum angle of
firebox door opening)
BACK WALL
S
ID
E
W
A
LL
S
ID
E
W
A
LL
FLOOR PROTECTION
RADIATION AREA
Table 2
Figure 4
Содержание P 12 SLIM WATER+AIR
Страница 14: ...SENKO pellet WATER AIR stoves Instruction manual 13 Figure 1 P 12 WATER AIR P 12 WATER AIR BOX...
Страница 15: ...SENKO pellet WATER AIR stoves Instruction manual 14 P 12 SLIM WATER AIR P 20 WATER AIR Figure 1...
Страница 17: ...SENKO pellet WATER AIR stoves Instruction manual 16 4 INSTALLATION 4 1 RECOMMENDATIONS Figure 3...