Senect AQUACULTURE AQC-A1-333-150, Руководство пользователя

Страница: 41 / 49

The Menu
41
IP: IP-address of the control unit
MAC: Mac-address of the control unit

WLAN configuration
Note: The remote access to the AQUACULTURE|CONTROL requires dynamic DNS,
port forwarding of the router and and internet access with IPv4. If you have only a
DS-Lite internet connection, additional devices (e.g. FIP-Box from feste-ip.de) may
be required.
If you want to integrate your AQUACULTURE|CONTROL in an existing WLAN-
network, you need a Windows (Version 7 or higher), Android or iOS-based device
on which the SENECT Control App is installed. The SENECT Control App is available
in the Google Playstore or the Apple App Store.
The Windows- and MacOS versions of the app
can be downloaded on
www.senect.de/app .
You can change the language of the app under
the “Settings” button.
Please have the name of the WLAN-network
(SSID Name) and the WLAN-password ready.
You need to proceed through the following steps to connect the AQUACULTURE|CONTROL
to the internet:

Set the AQUACULTURE|CONTROL in WLAN configuration mode
(Menu/WLAN/WLAN Configuration)

Connect your smartphone or PC to the network SENECT_AP (this is the
AQUACULTURE|CONTROL)

Start the SENECT Control App and press the button “WLAN Configuration”

Enter the WLAN network name (SSID) and password. Set the Encryption and
DNS/DHCP (typically “WPA / WPA2” and “on”)
Fig. 12: QR code for the link to
the SENECT Control App in the
Apple App Store. Fig. 13: QR code for the link to
the SENECT Control App in the
Google Play Store