User Manual
RM169-1
Pag. 27
Doc. MI004760-E
Rev. 0
www.seneca.it
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
Safety options (frame):
Time
: sets the value of the safety timer whose time base is selectable between minutes and hours. If the radio
doesn’t receive a valid packet within the selected time interval, the digital output (relay) is forced to a condition
chosen in the field "Relays to Open/Closed". To disable the functionality of the safety timer set the value of
"Time" to zero.
Minute
: the value of "Time" is expressed in minutes.
Hours
: the value of "Time" is expressed in hours.
Relays to
Open
: when the safety timer expires, the relay contact of digital output will be forced to open.
Relays to
Closed
: when the safety timer expires, the relay contact of digital outputs will be forced to closed.
Its address:
It is the value of the address of this radiomodem. It is advisable to configure each radiomodem with a unique
address.
Target address:
It is the address of the target radiomodem, the destination unit.
When a device working as digipeater this value is uninfluenced.
System Code & Digipeater address
(
double click of the mouse on "Target" or [Enter] key
):
When the focus is on the Target field, pressing the "Enter" key on the keyboard or by double clicking the mouse,
a window opens in which you can enter the system code and the addresses of the digipeater path to include in
the radio link.
The system code must be the same for all units in the network
.
