User Manual
RM169-1
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc. MI004760-E
Rev. 0
Pag. 22
respecting
the
maximum
limit
of
32
nodes
for
each
slave
unit.
Slave / Master
:
Allows you to select the functionality of the radiomodem between Master and Slave. The units configured as a
slave never takes the initiative of the transmission.
Internal node address
:
It is the address of the modbus node related to the internal peripherals of the radiomodem. Set a non-zero value
if you want to use its internal peripherals.
Ext node boot time:
This field specifies the amount of time required for the external modbus nodes and/or for the external analog
sensors (connected to the analog inputs of the radiomodem) to be operationalThis field has a value in steps of
100 milliseconds. Set this parameter considering the node that takes longer to start-up.
