Seneca RM169-1, Руководство пользователя

Страница: 5 / 33

User Manual
RM169-1
Pag. 5 Doc. MI004760-E Rev. 0
www.seneca.it
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
4. TECHNICAL SPECIFICATION
Operating data
Label Description Value
V
S (EXT)
Power supply, voltage range 9,0 → 32 Vdc
P
S (EXT)
Max power max. 5 W
I
Sleep
Sleeping current (Power Off) ≤ 150 μA @ 12Vdc
P
RF
RF transmission power Livello H 500 mW
Livello M 150 mW
Livello L 25 mW
RX
SENS
Receiver sensitivity ≤ -105 ± 3 dBm
RF
MOD
Modulation mode ***F1D
CH Canalization 12,5 – 25 – 50 kHz
BR Radio Baud Rate on radio channel 4.800 – 9.600 – 19.200 bps
Buffer Memory buffer 1024 bytes
Z
I/O ANT
Antenna impedance 50 ᅅ
Digital Input Rating digital input
5 – 24 Vdc
3 – 20 Vac
Z
DIGITAL-INP
Digital input impedence 2,2 k ᅅ
Digital
Output
Digital output rating
Normally Open
(NO)
24 Vac @ 0,5 A
32 Vdc @ 1A
I
A,B LINES
Max current out at RS-485 serial port ± 60 mA
BR DTE Baud Rate serial port 1.200 → 57.600 bps
WARNING Exceed the maximum operating value below (continuous and/or temporary) can damage the
device.
Maximum operating data
Label Description Value
V
S(EXT)
Max power supply voltage 32 Vdc
V
DIG-INP
Digital input, max voltage 24 Vdc / 20 Vac
V
DIG-OUT
Digital output, max voltage 32 Vdc / 28 Vac
V
P RS
Max peak voltage at the ports A/B RS-485
(1)
± 32 Vdc
I
A,B LINES
Max current out at the A/B RS-485 ± 200 mA
T
OPERATING
Operating temperature range -30°C +60 °C
T
STORAGE
Storage temperature range -40°C +85 °C
NOTE:
(1) Impulse time < 100 millisecond.