Sencotel Granita machine, Руководство по эксплуатации

Страница: 69 / 111

SL310006593 Ed.00 - 07-2011 - 19_EN -
Fig.46
Fig.47
Fig.48
Fig.49
Fig.50
7.9.1. Cleaning the Granitore 1/1FF condenser
The safety guards must be removed by means of a suitable screwdriver.
Remove the rear guard after taking out the screws securing it to the frame (the
screws are positioned on the left and right sides).
After removing the guard, use a dry brush to remove the dust that has built up
over time with use.
Once the condenser has been thoroughly cleaned, fi t all the safety guards back
in position.
7.9.2. Cleaning Granitore 2/2 FF - 3/3 FF cond.
To remove the safety guard panel, proceed as follows:
- Lift and completely remove the upper part of the side guard;
- Unscrew the 4 screws securing the guard in place;
- After removing the 4 screws, take off the guard.
After removing the guard, use a dry brush to remove the dust that has built up
over time with use.
After having thoroughly cleaned the condenser, reassemble all the safety guard
components.
7.10. Periodic maintenance
The machine must be periodically checked (at least once a
year) by a specialised technician.
This periodic check serves to ensure that all the components
installed and the machine itself are maintained at a high level
of safety.
Any worn components must be replaced by an original spare part.
It is forbidden to use the machine when even only one of its
components is faulty or worn. Users are forbidden to perform
periodic maintenance.