A2537-002/01 February 2020
6-9
SEMCO Proprietary Information
As previously mentioned, tall 3 channels are turned
ON
if Diversity Slaving is enabled.
Figure 6-14
Enabling the Bit Sync De-randomizer Using the Front Panel
Figure 6-15 illustrates the steps for selecting the de-randomizer input codes.
The operator pushes the
DEMOD MODE
button to access the
<
Ch1
>
Demod Menu
display, uses the
UP
(2) and
DOWN
(8) arrows to scroll to
BS INPUT CODE
in blue, and then pushes
ENTER
or
SELECT
(5)
to highlight the
selection window in
bright magenta
. Using the
UP
(2) and
DOWN
(8) arrows, the operator
selects the desired
INPUT CODE
and pushes
ENTER
or
SELECT
(5).
Using the horizontal
LEFT
(4) and
RIGHT
(6) arrows, the operator selects
<
Ch2
>
in the
Demod Menu
header display bar, pushes
ENTER
or
SELECT
(5) to highlight the selection window in
bright magenta
,
uses the
UP
(2) and
DOWN
(8) arrows to select
INPUT CODE
and then pushes
ENTER
or
SELECT
(5).
Using the horizontal
LEFT
(4) and
RIGHT
(6) arrows again, the operator selects
<
Comb
>
in the
Demod
Menu
header display bar, pushes
ENTER
or
SELECT
(5) to highlight the selection window in
bright
magenta
, uses the
UP
(2) and
DOWN
(8) arrows to select
INPUT CODE
and then pushes
ENTER
or
SELECT
(5).
As previously mentioned, all 3 channel settings are set-up simultaneously if Diversity Slaving is enabled.
Figure 6-15
Selecting Bit Sync De-Randomizer Input Codes Using the Front Panel
Содержание RC100C-2
Страница 105: ......
