A2537-002/01 February 2020
2-15
SEMCO Proprietary Information
2.6.1.3 Windows
Windows settings include
System Card Set
,
AGC Data Logger,
Combiner Zero
,
TM over IP
,
Receiver
Map
, and
Bit Sync
and
Spectral Sweep.
Figure 2-22 depicts the
System Card Set
selection, which is a listing of the configuration (HW and SW) of
all installed cards and modules.
Figure 2-22
System Card Set Selection on Remote GUI
Figure 2-23 shows the real-time AGC monitoring in Strip Chart format. This feature provides a running
visual display during a mission. The user clicks on
AGC Data Logger
and
Strip Chart
to enable this
feature. Controls on the Strip Chart Display include
Start
,
Pause
,
Reset
and
Auto
. All 3 channels are
displayed. One channel is illustrated here.
Figure 2-23
AGC Strip Chart Display
Figure 2-24 shows the AGC Data Logger and System Parameters Logger, which provides the ability to
time stamp and log both AGC output voltages and all receiver set-up parameters during a mission.
The user clicks on
AGC Data Logger
and
To File
, which opens up the AGC Data Logger window. The
user then clicks on
Select File
, chooses the file name and destination and clicks on
Save
. The file then
populates the window under
Selected File
as shown.
Содержание RC100C-2
Страница 105: ......
