Semco RC100C-2, Руководство пользователя

Страница: 23 / 105

A2537-002/01 February 2020 2-13 SEMCO Proprietary Information
Figure 2-19
System Naming Feature
2.6 SLTS Network GUI Design Features
The design of the SLTS Network Software windows and status displays incorporate lessons learned and
experience working over the years with users at the various Telemetry sites around the world. This design
is reflected in the layout and look of each setup and display window.
Users of SEMCO Telemetry receivers that have preceded the RC100C-2 are accustomed to using the GUI
design and interface of the Remote Control and Monitor Software (RCMS), both locally and remotely. In
so doing, these users will find similarities in SLTS in terms of simplicity and intuitive layout of all displays,
menus and controls. Importantly, SLTS incorporates the best of RCMS design while taking advantage of
new design features based upon years of experience and feedback from users of the RCMS program.
2.6.1 Toolbar Features
There are several GUI Toolbar features that facilitate use of the receiver for mission support and post-
mission analyses and, where applicable are also available from the front panel LCDs and keypad.
2.6.1.1 Receiver Settings
Receiver Settings
include AM Controls , which are addressed in detail in Section 4.0 of this manual.
2.6.1.2
System Configuration
System Configuration ( System Config ) addresses both the Naming Options feature and Slaving feature.
The Naming Options feature has been previously addressed in paragraph 2.5.2.