A2537-002/01 February 2020
2-14
SEMCO Proprietary Information
The
Slaving
feature provides for both
Frequency
and
Diversity
slaving of the receiver’s 3 channels.
Frequency
slaving allows the user to slave all 3 Demodulator settings to each other. This facilitates
Demodulator set-ups in that the user only has to enter the settings for one Demodulator, and the other 2
Demodulators are automatically set up with these same settings. CH1 and CH2 RF Tuner settings are still
independently set in the Frequency Slaving mode.
Diversity
slaving provides for this same capability as it applies to Demodulators and RF Tuners.
Figure 2-20 shows how to enable Frequency Slaving. The user clicks on
System Config
and then
Frequency Diversity (Demods)
, to activate the
SLAVING ON (Freq Diversity)
indication as shown.
Figure 2-20 also shows how to enable Diversity Slaving. The user clicks on
System Config
and then on
Diversity (Tuners, Demods)
, which activates the
SLAVING ON (Diversity)
indication as shown.
The Slaving feature using the front panel LCD displays and keypad is accessible using the
MENU
function
(Figure 2-21). The user presses
MENU
and then using the
DOWN
(8) arrow scrolls down to
Slaving
and
presses
ENTER
. Pressing
ENTER
again turns the selection box
bright magenta
. The user then uses the
DOWN
(8) arrow to select
None
,
Diversity
or
Frequency
and presses
ENTER
again. Once the desired
selection is made,
DELETE (
EXIT
)
is pressed to return the display to its original setting.
Figure 2-20
Slaving Feature on Remote GUI
Figure 2-21
Slaving Feature on Front Panel
Содержание RC100C-2
Страница 105: ......
