Semco RC100C-2, Руководство пользователя

Страница: 31 / 105

A2537-002/01 February 2020 3-1 SEMCO Proprietary Information
SECTION 3 – HARDWARE I/O
3.1
Hardware Telemetry I/O
Figure 3-1 depicts the RC100C-2 Rear Panel Telemetry I/O outlined in red. The Reference Designators,
connectors and a brief description is provided in Table 3-1.
Figure 3-1
RC100C-2 Rear Panel Telemetry I/O
Table 3-1
RC100C-2 System I/O
Reference
Designator
Connector
Type
Description
RECEIVER 1
NA N CH1 RF IN; 50 Ohm impedance
J1 BNC CH1 IF In (70 MHz IF Input & recorded pre-d 70 MHz playback; 50 Ohm Impedance)
J6 BNC CH1 IF OUT (70 MHz IF Output; 50 Ohm Impedance)
J17 BNC CH1 VID 0 (0-4 VDC Analog Baseband Video Output; 75 Ohm impedance)
J18 BNC CH1 VID 1 (0-4 VDC Analog Baseband Video Output; 75 Ohm Impedance)
J15 BNC CH1 VID 2 (Digital TTL Clock Output; 75 Ohm Impedance)
J16 BNC CH1 VID 3 (Digital TTL Data Output; 75 Ohm Impedance)
J24 BNC CH1 AM (AM Output; 2.0 Vp-p @ 50% AM; selectable 50 or 75 Ohm impedance)
J23 BNC CH1 AGC (AGC Output; sc/-10, 20 or 50 dB/V; selectable HI-LO impedance)
DIVERSITY COMBINER
J19 BNC COMB AGC (AGC Output; +/-10, 20 or 50 dB/V; selectable HI-LO impedance)
J20 BNC COMB AM (AM Output; 2.0 Vp-p @ 50% AM; selectable 50 or 75 Ohm impedance)
J9 BNC COMB VID 0 (0-4 VDC Analog Baseband Video Output; 75 Ohm impedance)
J10 BNC COMB VID 1 (0-4 VDC Analog Baseband Video Output; 75 Ohm impedance)
J7 BNC COMB VID 2 (Digital TTL Clock Output; 75 Ohm Impedance)
J8 BNC COMB VID 3 (Digital TTL Data Output; 75 Ohm Impedance)
J3 BNC COMB IF OUT (70 MHz IF Output; 50 Ohm Impedance)
RECEIVER 2
NA N CH2 RF IN; 50 Ohm impedance
J2 BNC CH2 IF In (70 MHz IF Input & recorded pre-d 70 MHz playback; 50 Ohm Impedance)
J4 BNC CH2 IF OUT (70 MHz IF Output; 50 Ohm Impedance)
J13 BNC CH2 VID 0 (0-4 VDC Analog Baseband Video Output; 75 Ohm impedance)
J14 BNC CH2 VID 1 (0-4 VDC Analog Baseband Video Output; 75 Ohm Impedance)
J11 BNC CH2 VID 2 (Digital TTL Clock Output; 75 Ohm Impedance)
J12 BNC CH2 VID 3 (Digital TTL Data Output; 75 Ohm Impedance)
J22 BNC CH2 AM (AM Output; 2.0 Vp-p @ 50% AM; selectable 50 or 75 Ohm impedance)
J21 BNC CH2 AGC (AGC Output; sc/-10, 20 or 50 dB/V; selectable HI-LO impedance)
ADDITIONAL I/O
J5 D Connector Optional Bit Sync, Frame Sync & BERT RS422 and CMOS /TTL I/O
LAN RJ45 Remote (network) Control via Ethernet
TMoIP RJ45 3-Channel CH10 or IRIG 218 Telemetry Over IP