MANUAL DE INSTRUCCIONES
CODIGO 80350 REV F
02/2021
Pag.: 28
J
.P. SELECTA s.a.u.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.grupo-selecta.com
13.1 Sterilization of instruments in bulk
Place the instruments on a tray with waterproof paper leaving a space
between each instrument.
Try to keep similar material instruments type together on a tray.
13.2 Tubing
The tubing needs to be clean and drained. Place the tubing so that
the openings on both ends are open. Make sure that the tubes are
not touching the autoclave wall, blocked or twisted and that nothing
can block the inside.
13.3 Vessels
Never put hermetically sealed vessels in the autoclave.
Place the contents open end down to prevent any residual water being
left inside.
13.4 Liquids
Place the receptacle with the liquid inside on a drip tray, making sure
that the receptacle can withstand the temperature.
Do not fill the receptacle more than 2/3rds of its maximum capacity,
DO NOT CLOSE THE LID IF IT HAS A HERMETICAL SEALED, only use
a lid if the pressure can be released.
Try to avoid using narrow neck vessels.
At the end of the cycle, let the autoclave cool down slowly (until the
pressure is 0 kg/cm²).
Notice to customers:
The product is made up of various components and various materials
that must be recycled or, failing that, deposited in the corresponding
debris removal sites when the product’s life has been completed or
when otherwise it is necessary to dispose of it. To do this, the end user
who acquires the product must know the current regulations of each
municipality and / or locality based on the waste electrical and elec
-
tronic equipment. The user who acquires this product must be aware
of and responsible for the potential effects of the components on the
environment and human health as a result of the presence of hazardous
substances. Never place the product in a conventional container of citi
-
zen scope if a previous dismantling and knowledge of the components
that incorporates. If you do not know the procedure to follow, consult
with the city council for more information.
