Selco Quasar 320 SMC Classic, Инструкция по эксплуатации

Страница: 46 / 296

46
8 TECHNICAL SPECIFICATIONS
QUASAR 320 SMC QUASAR 400 SMC QUASAR 400 SMC
Classic, Smart, Exclusive Classic, Smart Exclusive
Power supply voltage U1 (50/60Hz) 3x400V±15% 3x400V±15% 3x400V±15%
Zmax (@PCC)
*
- - -
Slow blow line fuse 20A 25A 30A
Communication bus DIGITAL DIGITAL DIGITAL
Maximum input power (kVA) 14.8kVA 20.9kVA 22.2kVA
Maximum input power (kW) 11.0kW 15.3kW 16.2kW
Power factor PF 0.74 0.73 0.73
Efficiency ( μ ) 89% 89% 89%
Cos
ϕ 0.99 0.99 0.99
Max. input current I1max 21.4A 30.1A 32A
Effective current I1eff 14.3A 19A 20.2A
MMA duty factor (40°C) (Q...EXCLUSIVE)
(x=40%) / / 400A
(x=45%) 300A / /
(x=60%) 280A / 360A
(x=100%) 240A / 330A
MMA duty factor (25°C) (Q...EXCLUSIVE)
(x=80%) 300A / /
(x=100%) 280A / 400A
MIG/MAG duty factor (40°C)
(x=40%) / 400A 400A
(x=45%) 320A / /
(x=60%) 280A 360A 360A
(x=100%) 240A 330A 330A
MIG/MAG duty factor (25°C)
(x=80%) 320A / /
(x=100%) 280A 400A 400A
Adjustment range I2 3A-320A 3A-400A 3A-400A
Open circuit voltage Uo 61Vdc 61Vdc 61Vdc
IP Protection rating IP23S IP23S IP23S
Insulation class H H H
Dimensions (lxdxh) 620x240x460mm 620x240x460mm 620x240x460mm
Weight 33 kg. 34 kg. 34 kg.
Manufacturing Standards EN 60974-1/ EN 60974-5/ EN 60974-1/EN 60974-5/ EN 60974-1/EN 60974-5/
EN 60974-10 EN 60974-10 EN 60974-10
Power supply cable 4x2.5mm2 4x4mm2 4x4mm2
Length of power supply cable 5m 5m 5m
QUASAR 320 SMC Classic, Smart, Exclusive
*
This equipment complies with EN/IEC 61000-3-11.
*
This equipment does not comply with EN/IEC 61000-3-12. If it is connected to a public low voltage system, it is the responsibility of the
installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be
connected. (Consult the “Electromagnetic fields & interferences” - " EMC equipment classification in accordance with EN/IEC 60974-10" section).
QUASAR 400 SMC Classic, Smart, Exclusive
*
This equipment complies with EN/IEC 61000-3-11 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
*
This equipment does not comply with EN/IEC 61000-3-12. If it is connected to a public low voltage system, it is the responsibility of the
installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be
connected. (Consult the “Electromagnetic fields & interferences” - " EMC equipment classification in accordance with EN/IEC 60974-10" section).
Q 320/400 SMC Classic Q 320/400 SMC Smart Q 320/400 SMC Exclusive
Wire feeder SL4R-1T(v.2R) SL4R-1T(v.2R) SL4R-2T(v.2R)
Wire feeder rated power 90W 90W 120W
No rolls 2 (4) 2 (4) 2 (4)
Wire diameter / Standard roller 1.0-1.2 mm 1.0-1.2 mm 1.0-1.2 mm
Wire diameters / 0.6-1.6 mm solid wire 0.6-1.6 mm solid wire 0.6-1.6 mm solid wire
Tractable rollers 0.8-1.6 mm aluminium wire 0.8-1.6 mm aluminium wire 0.8-1.6 mm aluminium wire
1.2-2.4 mm flux-core wire 1.2-2.4 mm flux-core wire 1.2-2.4 mm flux-core wire
Gas test button yes yes yes
Wire feed button yes yes yes
Wire backward push button no no no
Wire feed speed 0.5-22 m/min 0.5-22 m/min 0.5-22 m/min
Synergic programs no yes yes
External devices (RC) no no yes (optional)
Connector for Push-Pull torch yes (optional) yes (optional) yes (optional)
Coil Ø 200/300mm Ø 200/300mm Ø 200/300mm