EM00136061
rev. 2.5
EN
7
Paragraph 8 – Timed Dosage
(
Frequency signal input “TRIGGER” activated)
Programming
Operation
+
-
-
-
-
+
-
+
-
+
-
Time
Quantity
100ml
Delay
0.01.50
interv.
0.01.50
PROG
Time
Time
g.hh.mm
Time
g.hh.mm
Configuration
Pump functions
Configuration
Pump functions
-
-
Trigger Mode
Pause Input Mode
-
Trigger Mode
-
Trigger Mode
Trigger Mode
N. Open
N. Open
N. Closed
Disable
Trigger Mode
After receipt of the
TRIGGER
signal set, the pump doses a quantity
that can be programmed in ml. It is possible to set a delay time before
the dosing (
Delay
) and the interval between subsequent dosings
(
Interv.
) as illustrated in the diagram:
By setting for example an
Interval
.
time = 0, a system is obtained in
which the programmed quantity is dosed after each
TRIGGER
signal
(with any delay that has been set):
It is possible to start the dosing by pressing the + key, which, in
practice, simulates the
Trigger
signal.
The
Trigger
signal can be set to
N. Open
(it is activated when the
input passes from the open to the closed mode) or to
N. Closed
(it is
activated when the input passes from the closed to the open mode).
The
Trigger
signal is locked during dosing (its receipt is neither stored
nor managed).
The
Pause
(
Remote input
) input cannot be programmed and its
activation stops the dosing, while its further deactivation makes the
system wait again for the
Trigger
signal for a new dosing.
The dosage frequency can be modified while the pump is operating,
by pressing the
keys at the same time to increase the
frequency, or the
keys to decrease it.
Display during Operation
Display during Setting (MODE key)
Timer
F
F
F
7,0 ml
Stop
P 0%
Operating mode
Timer
Alarms and statuses
Liv = level alarm
Flow = flow alarm or
….Release wait
FLOW
sensor status
Programmed value
Quantity in ml
Pump status
Dry = pump starting up
Stop = pump stop
Restart = pump restart
Value of the dosing in
progress
Percentage of
strokes/min
max
Q.tà
20,0ml
20,0ml
P 100%
Operating mode
The following are shown in sequence:
quantity to dose, delay in d.hh.mm.
and interval in d.hh.mm
Dosing value
Programmed
quantity in m
l
Value of the dosing percentage,
which can be modified by
pressing the + or – keys
Delay
Interv
.
Quantity
Trigger
Delay
Trigger
Delay
Release
