Sega OUTRUN 2 SPECIAL TOURS SDX, Руководство по обслуживанию

Страница: 80 / 83

ERROR DISPLA
Y
• If there is an error display, search out the cause immediately and take
corrective action. If the product is operated while the error is ignored, there
could be an accident. There could also be permanent damage to parts, etc.
• If an error is displayed, have the site maintenance personnel or other qualified
individuals resolve it. If someone without specialized or technical knowledge
attempts to rectify the problem, electric shock, short circuits or fire may result. If
there is no site maintenance personnel or other qualified individuals available,
turn the power off immediately, and contact your retailer or the office listed in
this manual.
• If a problem not described in this manual and the LINDBERGH service manual
occurs, or the resolution to a problem described in this manual is not effective,
do not make further attempts to resolve the problem yourself. Immediately turn
off the power and contact your retailer or the office listed in this manual. Any
unguided attempts to solve such problems may lead to a serious accident.
• If countermeasures given in this manual have been taken and there are still no
improvements, contact the point of purchase or the office indicated in these
instructions.
• In the event that parts related to the ride mechanisms (actuators, limit switches,
etc.) are damaged or break down, or when parts replacement or repairs are
needed, request work be done by the point of purchase or the office listed in
this manual. Such procedures require specialized knowledge, techniques, and
tools. Improperly performed procedures can result in accidents.
ERROR DISPLAY
To respond to various problems, error messages appear on the screen whenever an error has occurred. If an error
message is displayed, the game cannot be played.
Errors are grouped into the following two categories.
(1) Error 01~52: These are errors on the LINDBERGH. For details, read the LINDBERGH service manual.
(2) Message Display: These errors are unique to this product.
Drive board is not connected to main board.
The driver board could not be detected.
Check the wiring between the drive board and LINDBERGH, and the power to the drive board.
Drive board : Original point error
Initialization of the steering wheel motor failed.
If the error again occurs ever after restarting the power, check the wiring to the steering wheel motor.
If there is something obstructing the movement of the steering wheel, remove it.
Drive board : Centering error
Initialization of the steering wheel motor failed.
If the error again occurs even after restarting the power, check the wiring to the steering wheel motor.
If there is something obstructing the movement of the steering wheel, remove it.
Also, confirm the the steering wheel volume value changes appropriately.
DRIVE BOARD FAULT DETECTED ENCODER ALARM
There is an abnormality with the motor encoder data.
Confirm that there are no abnormalities with the wiring to the motor.