SEF 551.10, Руководство по эксплуатации

Страница: 61 / 238

Page 5.3
5.0 Transport and setting up
Transport 551.19 \ 12.2015 \
Safety instructions for mounting and dismounting
WARNING
Risk of injuries due to missing safety devices
y
Generally it is not allowed to dismount any safety installa-
tions or to put them out of service.
If the dismounting of safety installations is necessary for service or
start-up work, you
y
must set the system out of operation according to
the instructions and under observance of all warning
notes
y
and secure it against unintended restart.
y
After any kind of electrical mounting work all safety instal-
lations and EMC protection measures have to be put into
operation again immediately and
must be checked for
function .
The operator takes liability for damage to property in case of
dismounted EMC protection measures, and the warranty expires.
Anyone who is dismounting or changing safety installations of the
soldering system is acting grossly negligent and against the valid
guidelines.
SEF Systec GmbH won't take any liability for damages to persons
or property caused by changed safety installations.
The mounting of additional installations is only allowed after written
approval of the manufacturer.

Soldering systems from series 551 must be mounted or
dismounted by qualified and instructed staff only.

Observe all instructions in this manual regarding mounting,
dismounting, start-up, rearrangement and adaptation.

Work at the controller must be only executed by electrically
skilled persons.

Use only original spare parts and original fuses with the
prescribed amperage.
DANGER
Danger of life by voltage-carrying parts
y
Before conducting any mounting or dismounting work at
the system or additional installations, they have to be set
volt-free.
Liability