SEF 551.10, Руководство по эксплуатации

Страница: 71 / 238

Page 5.13
5.0 Transport and setting up
Transport 551.19 \ 12.2015 \
Connecting soldering system to exhaust system
Exhaust
connection
y
Connect a heat resistant exhaust hose to this socket.
y
Connect the exhaust hose with a suitable airwasher sta-
tion or with an exhaust system with a minimum volume of
270 m³/h .
y
Switch on the exhaust system.
y
Check if the exhaust air is evacuated correctly from the
soldering system and does not escape in the production
room.
CAUTION
Danger of toxication
Soldering vapours on a continuing basis are hazardous to your
health.
y
Connect your system to your in-house exhaust air system
or to an air washer station with an minimum volume of
270 m³/h .
y
Don't let the vapours escape in the production area.
On the rear side of the soldering system you will find an exhaust
socket with a diameter of 60 mm.
y
Ensure an adequate air ventilation at the place of produc-
tion.
y
Observance of the safety and processing instructions
of the soldering paste manufacturer is required.

I
f you don't have an in-house exhaust-air system you
can use the exhaust box 551.10.2 to exhaust the sol-
der vapours which was especially designed for this
purpose.