SEF 551.10, Руководство по эксплуатации

Страница: 141 / 238

Page 8.9
8.0 System settings
System_settings 551.19 \ 12.2015 \
Activate password
protection
Activate password protection for programs
The adjusted soldering programs can be protected with a password.
If the password protection is activated with
<Yes> in the system set-
tings, an individual password is required when saving a program. The
profile parameters temperature and conveyor speed of a password
protected program can be only edited after entering the password
again.
y
Tip on the function key <Set up> in the system screen.
y
For activation select <Yes> under <Password protec-
tion> .
y
With <Back> you can change back to the system screen.
From now on an individual password is required when saving a pro-
gram. Therefore no special character length or character string is
defined.
If you don't want to enter a password for the program you can stop the
entry by pressing Return.
If you want to change the parameters of a password protected pro-
gram you can enable the editing of all parameters by a one-time entry
of the password.
y
Tip on the function key <Edit program> in the system
screen.
y
After demand enter the password. Now a changing of the
parameters in the system screen is possible.
The enabling is active until a new saving or loading of a program.