SEF 551.10 Скачать руководство пользователя

Страница: 31 / 238

Page 3.3

3.0 Warranty

arranty 551_19 \ 12.2015 \

Modifications or

improvements of
the product

Special
restrictions

General
regulations

Caveat emptor



The APT GmbH Automation und Produktionstechnik re-

serves the right to make modifications or improvements at

the product at its sole discretion. However the APT GmbH
Automation und Produktionstechnik is not obliged to make

these modifications or improvements available unrequested

and free of charge.



It is prohibited to copy or otherwise reproduce the product
and the written documents either in whole or in part in their

original or modified form. It is prohibited to modify the deliv

ered product or parts of it.



The general terms and conditions of the APT GmbH Automa-
tion und Produktionstechnik apply. The place of jurisdiction

and place of fulfilment is Uelzen.

Excluded from the warranty are:



consumables and wearing parts



defects or malfunctions resulting from incorrect handling or
improper operation



Damages which are caused by the non-observance of main-
tenance work

The warranty claim will expire, if



the product or parts of it have been opened or modified by

an unauthorized person,



the product type sticker has been removed/changed,



the entries on the warranty paper have been changed or
made illegible,



the damages are caused by dismounted EMC protective
devices.

Содержание 551.10















































































































































































































































Результаты поиска

Содержание 551.10

Отзывы:

Похожие инструкции для 551.10

Бренды по названию

Популярные бренды

SEF 551.10, Руководство по эксплуатации

Результаты поиска

Содержание 551.10

Отзывы:

Похожие инструкции для 551.10

Бренды по названию

Популярные бренды