SEF 548.10, Руководство по эксплуатации

Страница: 93 / 135

Page 7.9
7.0 Measurement
Measurement for 548.10 G \ 05.2007 \
Print a Process
Curve
Display Save Measure Print
MEASUREMENT
>> 01 Löten <<
02 Kleben
03 - -
04 - -
05 - -
Settings Program Measuring Sy stem
HEATER 1 V = 35 cm/min. Prg.: 03
40°C 40°C
210°C
Not Ready 548.10
Just recorded or loaded process curves can be printed out.
Please note,
that you are using an ESD capable cable and that you are
only connecting the interface plug while the system is tur-
ned off. In the chap ter "10.0 Tech ni cal Ap pen dix, Pin con-
nec tion" you will
fi nd the con nec tion and the pro to col of the
interface. Take care that the printer is ready and sup p lied
with paper inside of the printer.
\
Connect the printer with the interface socket at the
side of the system.
\
Press in system screen the function key
<Measure> for measurement.
The following screen appears:
\
You can select the desired process curve with <
V
>
and <
W
>.
\
Press <Print> . The process curve will be printed out.
You will proceed back to the procress curve menu.