SEF 548.10 Скачать руководство пользователя страница 24

Страница: 24 / 135

Page 2.4

2.0 Safety Instructions

The section „Pictograms at the system“ in this chapter deals with
the explanation of warning signs

xed at the system. The fol lo -

wing warning and information symbols shall draw your attention
the the safety instruction texts.
Memorize these symbols and their meaning.

Prohibitory sign:

Safety symbol meaning that a certain

behavior or activity which may cause danger is prohibited.
Non-compliance with these instructions may result in injury
and/or death.

Warning sign:

Safety symbol warning of a certain danger.

Non-compliance with these instructions may result in injury,
death and/or damage of the system.

Mandatory sign:

Stipulating a certain behavior. Non-com-

pliance with these instructions may result in serious inju-
ries.

To be found before explanations, information regarding
better handling of the system or before cross-references
referring to other text passages in this operation manual.

Safety Instructions for 548.10 G \ 05.2007 \

Important symbols contained in the operation manual

Prohibition sign

Warning sign

Mandatory sign

Text symbols

Содержание 548.10








































































































































Результаты поиска

Содержание 548.10

Отзывы:

Бренды по названию

Популярные бренды

SEF 548.10, Руководство по эксплуатации

Результаты поиска

Содержание 548.10

Отзывы:

Бренды по названию

Популярные бренды