manualshive.com logo in svg

SEF 548.10, Руководство по эксплуатации

Поделиться
Скачать
SEF 548.10 Скачать руководство пользователя страница 25

Page 2.5

2.0 Safety Instructions

Safety Instructions for 548.10 G \ 05.2007 \

 Remaining risks

Remaining risks are not obvious risks caused by the system . 
Even though the system has been designed and constructed 
according to the latest technology and the generally recognized 
rules regarding technical safety, remaining risks can not be com-
pletely excluded, even if the system is used properly.
Therefore, operate the system only in perfect technical conditi-
on, with awareness to your safety and possible health hazards 
as well as in compliance with the accident prevention regulati-
ons, the corresponding technical safety regulations, the relevant 
environmental directives, and the instructions regarding moun-
 ting, operation, maintenance and repair.

The operators must be informed, quali

fi

 ed and trai ned, posses-

sing suf 

fi

 cient know ledge due to their education and ex pe ri ence 

in this special 

fi

 eld and are familiar with the cor re spon ding re-

levant regulations on industrial health and safety stan dards as 
well as on accident prevention. They are also familiar with the 
generally recognized technical rules. Only such persons are al-
lowed to mount, dis mount, start ope ra ti on, do maintenance work 
and operate the system.

Protective clothing is a personal protection equipment protec-
ting the body against remaining risks resulting from the working 
process. The owner is responsible for the use of personal pro-
 tec tion equipment complying with the law of unit safety.
The relevant accident prevention provisions stipulate for each 
activity respectively each working place, resp., under which cir-
cumstances personal protection equipment has to be worn.

For example:

    

Heat-resistant gloves

 when working at

the 

hot

 heating chamber.

 Operators

 Protective clothing

 De

fi

 nitions

Содержание 548.10








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды