Seepex BW 10, Инструкция по эксплуатации и техническому обслуживанию

Страница: 5 / 186

Safety
Ausgabe
issue
B / 21.04.1999
Dokument
document
OM.SAF.01e
Blatt
sheet
2 (2)
2.5
Safety Instructions for the Operating
Company/Machine Operator
- Any potentially hazardous hot or cold machine
parts must be provided with protection against
accidental contact at the customer´s premises.
- Protective guards for moving parts (e.g. coupling)
must never be removed while the machine is in
operation.
- Leakages (e.g. in the shaft seal) of hazardous
conveying liquids (e.g. explosive, toxic, hot) must
be drained in such a way that no danger arises for
persons or for the environment. Always observe
the relevant statutory requirements.
- The risk of exposure to electrical power must be
eliminated (for details, see the VDE regulations, for
example, or those of the local power supply
company).
2.6
Safety Instructions for Maintenance, Inspection
and Assembly Work
The operator must ensure that all maintenance,
inspection and assembly tasks are carried out by
authorized and qualified personnel who have studied
the operating instructions closely and become
sufficiently familiar with the machine.
As a basic rule, the machine must be brought to
a standstill before work is carried out. Always comply
with the de-commissioning procedure described in
this document.
Any machines or assemblies conveying media that
are detrimental to health must be decontaminated.
Immediately following completion of work, all safety
and protective devices must be replaced
in position and, where applicable, re-activated.
Before re-starting the machine, observe the points
listed under the heading "Initial Startup".
2.7
Unauthorized Modification and Manufacture of
Replacement Parts
Conversions or modifications of the machine are
permissible only in consultation with the manu-
facturers. Original manufacturer replacement parts
and manufacturer-approved accessories enhance
the operational safety of the machine. The usage of
unauthorized parts may lead to the nullification of the
manufacturer's liability for any resultant damages.
2.8
Impermissible Modes of Operation
The operational safety of the machines supplied is
warranted only for employment in accordance with
the intended use as defined in Section 1 - General -
of these operating instructions. Never allow the
threshold values specified in the data sheet to be
exceeded.
7