Seepex BW 10, Инструкция по эксплуатации и техническому обслуживанию

Страница: 88 / 186

General
Ausgabe
issue
B / 02.01.2006
Dokument
document
OM.GEN.01e
Blatt
sheet
1 (2)
1.0
General
1.1
Application
These operating instructions contain basic infor-
mation on the installation, commissioning and
maintenance of seepex machines. Compliance with
the work steps described in the individual sections is
essential.
1.2
Details of the seepex machines
1.2.1
Operating Instructions
The Commission Number (comm. no) assigns the
operating instructions to a particular seepex
machine. The operating instructions are produced in
relation to a specific job/commission and are valid
only for the machine whose comm. no. is identical
with that indicated on the cover sheet and
possessing the associated data sheet, Point 9.
1.2.2
Manufacturer
The machines were manufactured by seepex.
1.2.3
Range, Size, Version
of the machines are stated in the appended data
sheet, Point 9.
1.2.4
Machine Comm. No. and Year of Construction
are stated on the type plate at the machine.
1.2.5
Release Date of the Operating Instructions
is stated on the cover sheet of the operating
instructions.
1.2.6
Modifications, Notes of Modification
If modifications to the machines are
carried out in agreement with seepex, a new set
of operating instructions will be provided, or the
existing operating instructions will be supplemented by
an additional sheet together with a new cover sheet.
The date of modification and modification index will be
noted on the new cover sheet.
1.2.7
EEC Machine Directive
1.2.7.1
Manufacturer's Declaration
seepex Manufacturer's Declaration as required by the
EEC Machine Directive 89/392/EEC, Appendix II B:
The seepex machines delivered in accordance with
our design are intended to be fitted in one machine or
assembled together with other machines to form one
machine/plant. The commissioning of the machine is
forbidden until such a time as has been established
that the entire machine/plant satisfies the
requirements of the EEC Directive for Machines as
amended 91/368/EEC and 93/44/EEC.
Particular attention must be paid to the safety
requirements specified in EN809 (s and Equipment
for Fluids) as well as the information in these
operating instructions.
1.2.7.2
Declaration of Conformity
seepex machines possessing no safety accessories
do not fulfill the requirements of the EEC Machine
Directive 89/392/EEC as amended 91/368/EEC and
93/44/EEC.
For this reason, no Declaration of Conformity as
required by the EEC Machine Directive 89/392/EEC,
Appendix IIA can be issued before appropriate safety
devices have been installed/mounted on the machine
and/or plant with due regard to the information given
in these operating instructions.
The following harmonized standards are particularly
applicable:
EN 809, EN292T1, EN292T2
Applicable national standards and specifications must
be taken into consideration.
Following assessment of the conformity of the
machine/plant with the EEC Machine Directive,
customers may on their own initiative place on the
full machine/plant the EEC symbol 'CE' as defined in
Identification Directive 93/68/EEC.
CAUTION
This documentation must be kept available for at
least 10 years.