Security Brands Edge 27-210, Руководство по прямому программированию

Страница: 73 / 80

Edge
Smart Keypads and Card Readers Direct Programming Manual

If you need help, please email techsupport@securitybrandsinc.com or call (972) 474-6390 .
69
Enter next sub mode 9 and listen for status tones:
Good tone:
Anti-passback disabled
One tone: Timed lockout enabled
Two tones: Scheme A enabled
Three tones: Scheme B enabled
Four tones:
Scheme C enabled
Enter # key to exit Programming Mode.
Configure Wiegand Inputs
These procedures will configure the Wiegand inputs.

IMPORTANT! DISABLING A WIEGAND INPUT WILL DELETE ALL RELATED WIEGAND CODES!
Note: To enable a Wiegand input as a vehicle tag reader, use the Edge Smart Keypad app.
Note: If either the anti-passback or split-relay feature is enabled, disable it before disabling
any Wiegand inputs.
Wiegand Input 1
1251
$
6
$
1
$
500
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter 1 (for Wiegand Input 1). No tone will sound.
Enter secondary sub mode 500 and listen for good tone.
Enter 0 to disable and listen for good tone.
Enter 1 to enable as keypad and listen for good tone.
Enter 2 to enable as card reader and listen for good tone.
Enter 3 to enable as remote and listen for good tone.
Enter # key to exit Programming Mode.
Wiegand Input 2
1251
$
6
$
2
$
500
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter 2 (for Wiegand Input 2). No tone will sound.
Enter secondary sub mode 500 and listen for good tone.
Enter 0 to disable and listen for good tone.
Enter 1 to enable as keypad and listen for good tone.
Enter 2 to enable as card reader and listen for good tone.