Security Brands Edge 27-210, Руководство по прямому программированию

Страница: 61 / 80

Edge
Smart Keypads and Card Readers Direct Programming Manual

If you need help, please email techsupport@securitybrandsinc.com or call (972) 474-6390 .
57
Scan Entry for Wiegand Card Readers and Vehicle Tag Readers
This procedure will add one or more latch codes with a specified facility code by scanning for a
Wiegand card reader or vehicle tag reader. Only the 26-bit format can be used.
1251
$
6
$
2
$
107
$
4
$
Scan First Card
$
...
$
Scan Last Card
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 2. No tone will sound.
Enter next sub mode 107 and listen for good tone.
Enter next sub mode 4 and listen for good tone.
Scan card to be added twice at reader and listen for good tone.
Repeat above step to add additional codes.
Note: Card-to-card swipe timeout is 10 seconds.
Enter # key to exit Programming Mode.
Note: This procedure will not work if Wiegand input is set to SBI Flex 64-bit format.
Delete Code(s) on Both Wiegand Inputs
These procedures will delete codes for Wiegand keypads, card readers, remotes, and vehicle tag
readers on both Wiegand inputs.
Quick Entry for Wiegand Keypad (uses default facility code)
This procedure will delete one or more codes for a Wiegand keypad.
1251
$
6
$
200
$
1
$
XXXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 200 and listen for good tone.
Enter next sub mode 1 and listen for good tone.
Enter code (26-bit: 5 digits; numbers only; max value 65535) and listen for good tone.
Repeat above step to add additional codes.
Enter # key to exit Programming Mode.
Note: This procedure will not work if any of the following are true:

One or both Wiegand inputs are disabled.

One or both Wiegand inputs are configured to share code list with non-Wiegand codes.

Each Wiegand input is configured to a different Wiegand bit format.

Split relay feature is enabled.