Security Brands Edge 27-210, Руководство по прямому программированию

Страница: 36 / 80

Direct Programming Manual
Edge
Smart Keypads and Card Readers
32

If you need help, please email techsupport@securitybrandsinc.com or call (972) 474-6390 .

Wiegand input is set to SBI Flex 64-bit format.

Wiegand input is disabled.

Wiegand input is configured to share code list with non-Wiegand codes.

Split relay feature is enabled.
Scan Entry for Wiegand Card Readers and Vehicle Tag Readers
This procedure will add one or more sleep codes with a specified facility code by scanning for a
Wiegand card reader or vehicle tag reader. Only the 26-bit format can be used.
1251
$
6
$
2
$
102
$
4
$
Scan First Card
$
...
$
Scan Last Card
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter 2 (for Wiegand Input 2). No tone will sound.
Enter next sub mode 102 and listen for good tone.
Enter next sub mode 4 and listen for good tone.
Scan card to be added twice at reader and listen for good tone.
Repeat above step to add additional codes.
Note: Card-to-card swipe timeout is 10 seconds.
Enter # key to exit Programming Mode.
Note: This procedure will not work if any of the following are true:

Wiegand input is set to SBI Flex 64-bit format.

Wiegand input is disabled.

Wiegand input is configured to share code list with non-Wiegand codes.

Split relay feature is enabled.
Add Latch Code(s) to Relay A on Both Wiegand Inputs
These procedures will add a latch code or codes to Relay A for Wiegand keypads, card readers,
remotes, and vehicle tag readers on both Wiegand inputs.
Quick Entry for Wiegand Keypad (uses default facility code)
This procedure will add one or more latch codes with the default facility code for a Wiegand
keypad. Both the 26-bit and SBI Flex 64-bit formats can be used.
1251
$
6
$
103
$
1
$
XXXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 103 and listen for good tone.