Security Brands Edge 27-210, Руководство по прямому программированию

Страница: 44 / 80

Direct Programming Manual
Edge
Smart Keypads and Card Readers
40

If you need help, please email techsupport@securitybrandsinc.com or call (972) 474-6390 .

One or both Wiegand inputs are configured to share code list with non-Wiegand codes.

Each Wiegand input is configured to a different Wiegand bit format.

Split relay feature is enabled.
Quick Entry for Wiegand Card Readers, Remotes, and Vehicle Tag Readers
This procedure will add one or more access codes with a specified facility code for a Wiegand
card reader, remote, or vehicle tag reader. Only the 26-bit format can be used.
1251
$
6
$
104
$
2
$
XXX
$
XXXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 104 and listen for good tone.
Enter next sub mode 2 and listen for good tone.
Enter 3-digit facility code and listen for good tone.
Enter 5-digit access code and listen for good tone.
Repeat above step to add additional codes.
Enter # key to exit Programming Mode.
Note: This procedure will not work if any of the following are true:

One or both Wiegand inputs are set to SBI Flex 64-bit format.

One or both Wiegand inputs are disabled.

One or both Wiegand inputs are configured to share code list with non-Wiegand codes.

Each Wiegand input is configured to a different Wiegand bit format.

Split relay feature is enabled.
Bulk Entry for Wiegand Card Readers, Remotes, and Vehicle Tag Readers
This procedure will add access codes with a specified facility code in bulk for a Wiegand card
reader, remote, or vehicle tag reader. Only the 26-bit format can be used.
1251
$
6
$
104
$
3
$
XXX
$
XXXXX
$
XXXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 104 and listen for good tone.
Enter next sub mode 3 and listen for good tone.
Enter 3-digit facility code and listen for good tone.
Enter 5-digit starting access code and listen for good tone.
Enter 5-digit ending access code and listen for good tone (maximum of 100 codes).
Enter # key to exit Programming Mode.