Technical description
17
The device can be charged in the transport case, provided the case is connected to a
mains supply.
Take one of the charging cables in the case with a round plug and connect it to the USB
port
of the HLE 7000. Note the marking. You must feel the plug engage.
The device can also be connected to the mains for charging. Use the supplied power
adapter and the VK 130 connection cable.
Connect the round plug of the cable to the USB socket
of the HLE 7000. Plug the
other end of the cable into the power adapter and the power adapter into an electrical
outlet.
When charging in the case or when using the included power adapter, the charging time
is about 8 hours. If a third-party power supply unit with less than 1.5 A charge current is
used, the charging time increases considerably.
During charging, the I/O LED on the device will turn solid red. The red light goes out as
soon as the battery is fully charged.
The LED flashes red when an error occurs during charging. The charging process is
aborted in this case.
While the HLE 7000 is connected to a computer, charge current flows from the
computer to the device via the USB connection. The I/O LED on the device turns red.
However, the charge current is too low to charge the battery noticeably.
Charging in the
transport case
Charging on the mains
Duration
LED
USB
