Data transfer
69
8
Data transfer
The HLE 7000 operating unit can be connected to a computer via the VK 130
connection cable.
This connection allows measured data and audio files to be transferred to the computer
and into the HydroluxView software. In the other direction, firmware update files are
imported into the HLE 7000, for example.
To connect the HLE 7000 to the computer, proceed as follows.
Step Description
1
Use the supplied connection cable VK 130.
Insert the round connector of the cable into the USB socket
on the
HLE 7000. Observe the guide on the connector and socket. You must feel the
plug engage. Plug the other end of the cable into a USB port on the computer.
2
On the screen of HLE 7000, from the Start menu, tap
Management
>>
Backup
>>
Connect
.
Result:
The HLE 7000 is recognised by the computer as a disk.
To end the connection, tap
Disconnect
on the HLE 7000 screen. The connection cable
can then be removed again.
Procedure
