Technical description
23
If a situation occurs in which the pairing needs to be performed again (for example, after
the HLE 7000 has been reset to factory defaults), or a different headphone model needs
to be paired, proceed as follows:
Step Description
1
In the Start menu of the HLE 7000, tap
Management
>>
Settings
>>
Paired headphone
.
2
Switch the headphones on.
(Third-party headphones may need to be put into pairing mode in some other
way. Please consult the corresponding operating manual.)
Result:
The LED on the headphones flashes alternately blue/red.
3
On the HLE 7000 screen, tap the
button.
Result:
The search for Bluetooth devices in the area begins. A bar indicates
the progress.
After a successful search, the name of the headphones is displayed on the
screen. If no device or the wrong device has been found, repeat the search.
4
Tap the name of the headphones.
Result:
The HLE 7000 and the headphones are paired.
When finished, the screen returns to the Settings menu.
The headphones (here: BoomBoom 560) is automatically detected from now
on when switched on.
3.4.4
Volume
You can adjust the volume directly on the headphones, or via the volume menu on the
HLE 7000 screen.
On the headphones, you will find the
V +
and
V-
buttons to increase or decrease the
volume.
When making or displaying a measurement, you will find various tool buttons on the
right edge of the screen of the HLE 7000. With the headphones button
open a
menu to adjust the headphone volume.
3.4.5
Power supply
The headphones are equipped with an internal lithium-ion battery. At full charge, an
operating time of approximately 8 hours is available, depending on the intensity of the
usage.
The current battery level of the headphones is displayed in the lower left corner of the
screen of the HLE 7000. When the battery is low, a beep will sound.
