Seat MEDIA SYSTEM 2.2, Руководство пользователя

Страница: 73 / 112

72 Navigation
Ending demonstration mode
As a general rule, the Demo mode should be switched off after use, other-
wise you will always have to select between virtual navigation or normal
navigation before starting navigation to a destination.
Normally, the demonstration mode automatically ends on completion of the
route guidance programme or when a new navigation destination (not de-
tour) is entered. When the vehicle starts to move, or when the unit is switch-
ed off, the demonstration mode ends.
If necessary, switch off the demonstration mode in the
navigation
setup
menu.
● Press the
SETUP
unit button in one of the navigation menus.
● Untick the checkbox for the

Demo mode
function button.

Setup menu Navigation
Fig. 75 Navigation setup
menu.
Fig. 76 Navigation setup
menu.
Press the
SETUP
unit button from any navigation menu to open the Naviga-
tion setup menu
⇒
Fig. 75 .
Function button: Effect
Route options
:
⇒
page 62.
Announcement volume
: Turn the setting knob
⇒
Fig. 1
10
to adjust the vol-
ume of navigation announcements. To switch off, turn the knob to the left
until
Off is displayed.
The volume of the navigation announcements can also be controlled from
the general volume settings
⇒
page 99.
Day / night
Automatic
: the map mode changes from daytime to night-time view
as the dipped headlights are switched on.
Day
: the map view remains in daytime mode (bright).
Night
: the map view remains in night-time mode (dark).

POIs on map
: Points of interest (petrol stations, car parks, Technical Serv-
ices) will be displayed as symbols on the map.

Autozoom
: “automatic zoom” mode for activated map
⇒
page 64.
