Seastar Solutions i7700, Руководство по установке

Страница: 8 / 60

Perform a system inspection as outlined below.
1. Check steering fluid level.
2. Verify immediate steering response when turning steering wheel(s).
3. Inspect all steering hoses, fittings, mechanical cables, and
electrical harnesses for wear, kinks, or leaks.
4. Check for binding, loose, worn or leaking steering or shift/throttle
control components.
5. Verify proper shift and throttle response for all control handles.
Prior to every use
1. WEAR A COAST GUARD-APPROVED PERSONAL FLOTATION
DEVICE (PFD).
2.
ATTACH ENGINE SHUT-OFF CORD (LANYARD) TO YOUR PFD.
3. Never allow anyone who is not familiar with the operation of the
shift and throttle system to operate the boat at any time.
4. If boat is equipped with multiple helms, ensure that only one is
used at a time.
5.
Know and adhere to all applicable federal, state, and municipal laws
and regulations that govern boating in your area.
During use
The i7700 system requires no special attention after use. Periodically
clean the control head with a damp cloth or mild soap. DO NOT use
acetone, or cleaners containing ammonia, acids, or any other
corrosive ingredients.
After use
DO NOT OPERATE BOAT IF ANY COMPONENT IS NOT IN PROPER
WORKING CONDITION.
WARNING
DO NOT OPERATE BOAT IF ANY COMPONENT IS NOT IN PROPER
WORKING CONDITION.
WARNING
FAILURE TO COMPLY WITH ANY WARNING, NOTICE OR CAUTION
MAY LEAD TO LOSS OF STEERING OR SHIFT/THROTTLE CONTROL
RESULTING IN A COLLISION AND/OR EJECTION FROM THE BOAT
LEADING TO PROPERTY DAMAGE, PERSONAL INJURY AND/OR
DEATH.
WARNING
1-2
© 2017 SeaStar Solutions i7700 Installation Supplement, Rev. B