Seastar Solutions Autopilot Pump, Руководство по эксплуатации

Страница: 7 / 32

Autopilot Pump 3
Things You Need To Know!
SeaStar/SeaStar PRO Steering hoses CANNOT be cut. Cutting
these hoses will render them useless. Failing to comply may
result in possible loss of steering causing property damage,
personal injury and/or death.
WARNING
DO NOT use SeaStar nylon tubing with the Autopilot pump, other
than for the compensating line. Use of SeaStar/ SeaStar PRO steering
hose is the ONLY hose recommended for use in these systems.
CAUTION
Take EXTREME care not to allow any foreign material or contaminant
to enter the hydraulic steering system. Contamination is the
main cause of hydraulic system wear and/or failure. Keep
protective caps on hose ends until ready to thread onto a fitting.
CAUTION
Confirm that ALL components needed to complete the installation
are purchased, including helm pump, steering cylinder, hoses,
fluid, fittings and pipe sealant such as Loctite
®
PST. NEVER USE
TEFLON TAPE, ONLY USE A LIQUID, TEFLON BASED PIPE SEALANT.
CAUTION
Stretched, kinked or chafed hose will fail over a period of time.
Check hoses frequently to avoid potential loss of steering causing
property damage and/or personal injury or death.
WARNING
When working in an area where fumes from fuel are present, allow
the fumes to disperse completely BEFORE doing any electrical
connections of any kind. Failure to do so may result in an
explosion or fire.
WARNING
If installed in a system that does NOT have a SeaStar helm, an
external pressure relief valve set at 1000psi MAX, such as Part
# HA5822 or equivalent, MUST be installed.
WARNING
If retrofitting onto an existing SPA installation a HA1205 retrofit kit will
be required.
NOTICE
AUTOPILOT PUMP