Autopilot Pump
15
3.1.2
3.1.1
• Turn the steering wheel clockwise until the cylinder rod is fully
extended as shown below.
• Open bleed fitting as per your installation.
OPEN RIGHT SIDE
BLEEDER
TURN
CLOCKWISE
Outboard Front Mount & HC5332-2 Cylinder
OPEN LEFT SIDE
BLEEDER
TURN
CLOCKWISE
Side Mount / Splashwell Mount Cylinder
All Balanced Cylinder. Inboard & Sterndrive Cylinders
OPEN LEFT SIDE
BLEEDER
TURN
CLOCKWISE
FILLER PLUG
(REMOVED)
PUSH PIN
FILLER KIT
HELM FILL PORT
DO NOT LET
OIL LEVEL
FALL BELOW
THIS POINT
Step 3.1 Fill & Purge Manually
The following procedure applies to a single helm and single cylinder
installation.
Other configurations will require this procedure plus the additional
steps outlined on page 19.
• Attach helm filler kit (HA5438) and fluid bottle to the helm. Refer
to figure 8.
NOTICE
Filling the helm full of fluid prior to
connecting the filler tube and oil
bottle will decrease purge time.
NOTICE
If using the SeaStar Power Purge
JR/SR please refer to page 18.
Figure 8.
AUTOPILOT PUMP
Содержание Autopilot Pump
Страница 28: ...24 SEASTAR Hydraulics This page left intentionally blank...
Страница 30: ...26 SEASTAR Hydraulics This page left intentionally blank...
Страница 31: ......