Revision 22 13.10
38
1.
a.
Harness may be unplugged
b.
Faulty display harness
c. Transformer
fuse
blown
d.
Display board defective
e. Restart
machine
2.
a.
Disconnected tray wire harness
b.
Detection system may be blocked, if enabled
c.
Vend mechanism binding on tray
d. Product
jammed
e.
Tray or Motor connection unplugged or faulty connection
f. Defective
motor
3.
a.
Detection system malfunction, if enabled
b. Defective
motor
switch
c.
Detection system may be blocked, if enabled
4.
a. Defective
motor
b.
Motor harness not plugged into the vend motor correctly
c.
Defective or damaged motor interface board [KS11]
d. Tray
cable
faulty
5.
a.
All Prices are set to zero or machine is set to Free Vend
b.
Will not accept bill if coins in coin changer below the minimum level
c.
Will not accept more than one bill if the bill equal or exceeds the highest priced item.
d.
No power to system control board
e.
Coin Mechanism or Bill acceptor defective.
Q:
I rearranged my trays and now some selections don’t work. Display says Make Alternate Selection.
A:
Enter the service mode. Press the 10 button 4 times. Display should show Passcode Accepted. Scroll to
Advanced sub menu and press F to enter. Scroll to Rows / columns setting and press F to enter. Display will show setting
for each tray position. The 1 button will cycle through the different tray configurations. It will cycle from 0 (tray off) then to
4, 5, 7, 8, 10 then back to 0. Set this to the number of selections on that tray. When finished with the settings for that tray
use the arrow keys to scroll to the next one to set. If you are finished press the G key multiple times to exit. This only
applies to machines with software revision .65 and higher. Earlier versions will require a software update. Contact your
distributor or sales person for update information.
NO DISPLAY ON THE FRONT PANEL
SELECTION WILL NOT VEND
MULTIPLE VENDS FROM ONE SELECTION
MULTIPLE VENDS MORE THAN ONE SELECTION SIMULTANEOUSLY
UNIT WILL NOT ACCEPT MONEY