Revision 22 13.10
14
TO EXIT SERVICE MODE
The controller will remain in service mode as long as the user keeps using the keypad to move through the various
service mode MENUS. The controller will automatically exit service mode and return to sales mode if any of the following
occur:
1) The user is inactive for more than 1 minute
2) The user presses the EXIT key (G).
After exiting the service mode, the installed firmware version shows on the display for three seconds, then the controller
will revert to sales mode.
SERVICE MODE MENUS
The chart below shows the sub-menus while in Service mode:
In the following instructions, refer to the drawing of the four button navigation key drawing on the left side of the page.
Follow the arrows, paying attention to the navigation instructions (F), (G), (
↑
) and (
↓
)
PRICES SUB-MENU
The Prices sub-menu allows you to set prices in three different ways – Set ALL, Set ONE, Set Tray. Set ALL will allow you
to set all of selections in the machine to the same price. Set ONE will allow you to set one individual selection of your
choosing. Set Tray will allow you to set an entire tray to the same price.
