Revision 22 13.10
5
Fig. 1 - Exterior View (I5C 5-Wide Combination Machine Shown)
Protective shipping guards (Fig. 2) were installed on the leveling legs at the factory. Once the machine is placed near its
final location the protective shipping guards should be removed. To remove the shipping guard, unscrew the leveling leg
from the bottom until the guard is loose – a few turns only. The guard is held together with four phillips head screws and
two brackets. Remove the screws and the guard will split in half for removal.
Fig. 2 – Shipping Guards
Coin Slot
Lock
Display Window
Front Door
LCD Display
Key Pad
Bill Validator
(not installed on all models)
Product Door
Coin Return
Door
Coin Return
Button
CAUTION:
Certain procedures described in this manual require electrical power to the
vending machine. Only trained personnel should perform these functions. Use extreme
caution while performing the procedures marked with the voltage symbol shown here:
CAUTION:
Certain procedures described in this manual require a qualified, trained
technician to perform the particular task at hand. These procedures will be marked with the
attention symbol shown here:
Screws
Screws
Leg Leveler
Protective Guard
